Esempii di prublemi cumuni di sgranatrici

Attraversu a nostra comprensione precedente è una comprensione approfondita di umachine à sgranà, there will still be some novices who do not fully understand the machine à sgranà. At the same time, it is also popularized based on what we have not mentioned before. The following are some examples of our problems and polishing The technical requirements for shot blasting of the machine à sgranà, etc., I hope you will learn something and strengthen your own practical deficiencies.
1. Fighjendu umachine à sgranàda un puntu di vista prufessiunale, chì tipu di macchina hè? Cume sceglie un stabilimentu di produzzione è trasfurmazione di funderia?

The machine à sgranà itself is a surface treatment equipment, dedicated to solve the problem of imperfect surface of metal objects, and can remove the rust layer, rust spots, oxidation, painting, renovation, etc. on the surface of metal objects. For the foundry industry, performance, stability and quality should be considered when choosing a machine à sgranà. Secondly, considering the price, because there are more machine à sgranàs in the market, you can choose to shop around. Only then can there be price comparisons.

2. Chì sò i requisiti tecnichi per u granaghju? Chì sò l'aspetti principali?

Un puntu hè u prublema di umachine à sgranà itself. On the basis of shot blasting technology, the machine à sgranà must be stable enough, and what kind of machine à sgranà is used for example: steel shot, iron shot, aluminum shot , And what is the size of the pellets, and then what is the ejection speed when we shot blasting. The professional name is called ejection flow. Different shot blasting intensities have different throwing effects, and the efficiency will be corresponding. Get the same change.

3. What should I do if the machine à sgranà misses the shot? How to solve it?
Sì umachine à sgranà is in use, it is likely to be caused by the shape of the workpiece, but this is not an absolute factor. Usually, there will be more probability at the exit of the machine à sgranà. According to this point, we will cause Pay attention, and deal with the missing blasting material at any time during the working time, so as not to form a pile, so as not to affect the normal shot blasting progress.
The above three points are reference for common problems of machine à sgranàs, which are very useful for production and processing manufacturers. According to strict production, the shot blasting effect will not be bad, so we must also think from a comprehensive perspective in order to achieve ourselves The expected effect.